1. Always place the pump at the appropriate level for the job. Spread the notice at the pump to avoid being soiled when ink fall. While the ink pump must have paper towels or absorbent material to saturate the ink drops fall. Wear plastic gloves when refilling toner.
2. Be familiar with the instruments before the ink pump.
3. Avoid touching directly on the circuit, rivulets of ink spray. The oils on your fingers can disrupt the contact of the circuit with the printer. Can wipe with damp cloth smooth, alcohol.
4. Get out of printer ink before the ink pump.
5. Before the pump must be cleaned around inkpot.
6. The best way to use ink was checked periodically and pump more ink, ink pump ink in the bottle before the end, and so the ink nozzles from clogging, 1 week we should print one page.
7. Avoid getting ink in the bottle is empty. Refill as soon as possible. If toner average over 8 hours, the spray gets clogged canals. Then we have to soak the print head in a mix of 50% water and 50% ethanol for 15 minutes or boiling water.
8. Before the ink pump to be pinpointed in the compartments of the cartridge. Check using a toothpick into the whole gym.
9. When the pump ink to be done slowly (10 to 20 seconds for 01ml) to avoid causing foaming ink, will affect the print quality. If effervescent we should wait about 30-60 minutes before printing. If spilled ink around the nozzle, the pump stops and the syringe suck out about 0.5 ml of ink.
10. Holding the toner bottle carefully. No pump rampant. When the pump if rust or ink nozzles streamed from the chamber, you must stop. Blot the spill or leak ink immediately so as not to permeate the next compartment.
11. The ink pump is complete; we should press the nozzle into the thin porous paper to check clogged ink nozzles have or not, if the color or black stripes are not disrupted as is.
12. Insert the ink in the printer, use the printer software to wipe and clean the ink nozzles.
13. Seal the hole has injected ink to prevent ink from leaking out. Do not install the ink to leak into the printer. compact photo printer reviews
14. After the pumping to preserve the remaining ink for later injections.
15. For better results and avoid the drying nozzles, 1 week we should print a color page and black